MTU C23R Instruções de Operação descarregar pdf (Página 17)

Lead

• Adopt suitable measures to avoid the formation of lead dust.

• Switch on extraction system.

• When working with lead or lead-containing compounds, avoid direct contact to the skin and do not

inhale lead vapors.

• Wash hands after contact with lead or lead-containing substances.

Compressed air

Observe special safety precautions when working with compressed air:

• Unauthorized use of compressed air, e.g. forcing flammable liquids (danger class AI, AII and B) out of

containers, results in a risk of explosion.

• Wear goggles when blowing off components or blowing away chips.

• Forcing compressed air into thin-walled containers (e.g. containers made of tin, plastic and glass) for

drying purposes or to check for leaks, results in a risk of bursting.

• Pay special attention to the pressure level in the compressed air network or pressure vessel.

• Assemblies or products to be connected must either be designed for this pressure, or, if the permit-

ted pressure for the connecting elements is lower than the pressure required, a pressure reducing

valve and safety valve (set to permitted pressure) must form an intermediate connection.

• Hose couplings and connections must be securely attached.

• Provide the snout of the air nozzle with a protective disk (e.g. rubber disk).

• First shut off compressed air lines before compressed air equipment is disconnected from the supply

line, or before the equipment or tool is to be replaced.

• Carry out leak test in accordance with the specifications.

Paints and lacquers

• Observe the relevant safety data sheet for all materials.

• When carrying out painting work outside the spray stands provided with fume extraction systems,

ensure that the area is well ventilated. Make sure that neighboring work areas are not impaired.

• Avoid open flames in the vicinity.

• No smoking.

• Observe fire prevention regulations.

• Always wear a mask providing protection against paint and solvent vapors.

Liquid nitrogen

• Observe the relevant safety data sheet for all materials.

• Store liquid nitrogen only in small quantities and always in specified containers (without fixed cov-

ers).

• Avoid body contact (eyes, hands).

• Wear protective clothing, protective gloves, closed shoes and protective goggles.

• Make sure that working area is well ventilated.

• Avoid all knocks and jars to the containers, fixtures or workpieces.

Acids/alkaline solutions/urea solution (AdBlue, DEF)

• Observe the relevant safety data sheet for all materials.

• When working with acids and alkaline solutions, wear face mask, gloves and protective clothing.

• Do not inhale vapors.

• If urea solution was swallowed, rinse mouth and drink plenty of water.

• If the solutions was spilled onto clothing, remove the affected clothing immediately.

• In case of skin contact, rinse parts of the body thoroughly with clean water.

• Rinse eyes immediately with eyedrops or clean tap water. Seek medical attention as soon as possi-

ble.

M015695/03E 2013-03

| Safety | 17

TIM-ID: 0000040536 - 002

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 162 163

Comentários a estes Manuais

Sem comentários

MTU C23R Instruções de Operação Página 17

Comentários a estes Manuais

Manuais e produtos relacionados com Motor MTU C23R