MTU C23R Instruções de Operação descarregar pdf (Página 8)

1.4 Crankshaft transport locking device

Special tools, Material, Spare parts

Designation / Use Part No. Qty.

Torque wrench, 10-60 Nm

F30452769 1

Torque wrench, 60-320 Nm

F30452768 1

Engine oil

Transport locking device

Note: The locking device on both ends protects the crankshaft bearings from shocks and vibration damage

during engine transport.

For installation and removal of the transport locking device, follow the in-

structions below:

1. The transport locking device must remain installed on both ends as long as possible during engine in-

stallation in order to avoid damage.

2. Prior to every engine transport, the transport locking device must be reinstalled on both sides according

to the instructions.

3. If the engine is to be moved together with the generator, the transport locking device for the generator

must also be installed.

4. Always use the screws supplied with or installed in the transport locking device to secure it on the en-

gine.

5. Starting or barring the engine is allowed only with the transport locking device removed. If the genera-

tor is already mounted on the engine, ensure that the transport locking device of the generator is also

removed.

6. Attach these instructions, clearly visible, to the engine.

Fitting the transport locking de-

vice on driving end (KS)

Note: Attach plate (6) only to the upper part of the openings.

1. Secure the two plates (6) with screws (4) and washers (5) at the bores on both sides of the flywheel

housing and tighten to the specified tightening torque.

Name Size Type Lubricant Value/Standard

Screw M16 Tightening torque (Engine oil) 250 Nm +25 Nm

8 | Safety | M015695/03E 2013-03

TIM-ID: 0000035999 - 002

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 162 163

Sem comentários

MTU C23R Instruções de Operação Página 8